How often should you flush a water heater?
Flush a tank water heater about once a year to clear out sediment. If you have hard water, every six months is better. Tankless water heaters need descaling about once a year, more often with hard water. Once a year, also test the temperature and pressure relief valve. Every few years, have the anode rod checked, since it's what keeps the tank from rusting. Your water heater's manual has the exact schedule for your model.
Why flushing matters
Minerals in water settle to the bottom of the tank as sediment. Over time that layer makes the heater less efficient and can cause popping or rumbling sounds. It can also wear the tank out faster. Flushing drains the sediment out.
Tank water heater schedule
- Flush: once a year, or every 6 months with hard water.
- Test the temperature and pressure (T&P) relief valve: once a year. This safety valve releases pressure if the tank gets too hot.
- Check the anode rod: every 3 to 5 years, sooner with hard water or a water softener. Replacing a worn rod can add years to the tank.
- Look for leaks and rust around the base and fittings a few times a year.
Tankless water heater schedule
- Descale (flush with vinegar or a descaling solution): once a year, more often with hard water. Many units show a maintenance alert when they need it.
- Clean the inlet water filter screen when you descale.
How a tank flush works (overview)
Steps vary by model, so follow your manual. In general:
- Turn the heater off. For gas, set the control to "pilot" or "vacation." For electric, switch off the breaker.
- Let the water cool for a few hours, since tank water can scald.
- Turn off the cold water supply to the heater.
- Attach a garden hose to the drain valve near the bottom and run it to a floor drain or outside.
- Open a hot water faucet somewhere in the house, then open the drain valve and let the tank empty.
- Briefly turn the cold supply back on to stir up and rinse out remaining sediment, until the water runs clear.
- Close the drain valve, refill the tank until water flows steadily from the open hot faucet, then turn the power or gas back on.
Signs your water heater needs attention
- Popping or rumbling noises (sediment)
- Rusty or discolored hot water
- Less hot water than before
- Water pooling around the base
- A leaking T&P relief valve
A tank water heater typically lasts about 8 to 12 years. If yours is in that range and leaking from the tank itself, it's usually time to replace it.
Frequently asked questions
What happens if you never flush your water heater?
Sediment builds up on the bottom of the tank. The heater gets less efficient and noisier, and the tank can wear out sooner. Very heavy sediment can also clog the drain valve, which makes a later flush harder.
Can I flush my own water heater?
Many homeowners do, following the manual. Use care with hot water and with gas controls. If the drain valve is stuck or the heater is gas and you're unsure, have a plumber do it.
How long does a water heater last?
A tank water heater typically lasts about 8 to 12 years, and a tankless one often lasts 20 years or more with regular descaling. Hard water and skipped maintenance shorten both.